Enhanced Strength and Stiffness
Greater Dimensional Stability
Fine Matte Finish
Durability and Water Resistance
Comes with High Temperature Reusable Spool
Diameter: 1.75mm +/- 0.03mm
- 0.2 mm Nozzle NOT Compatible
- AMS 2 Pro, AMS HT & AMS Compatible
- AMS lite NOT Compatible
- Enclosure Printers Required
Color Code:41300
Looking for other products of Bambu Lab?
Frequently bought together with Bambu ABS GF Orange Filament
Description
Glass Fiber Reinforced Performance
Bambu ABS-GF is a glass fiber-reinforced ABS filament designed to enhance both mechanical performance and surface quality in 3D printing. Compared with standard ABS filament, ABS-GF offers improved strength, stiffness, heat resistance, and dimensional stability. The added glass fiber also helps reduce warping and deformation during printing while producing a refined matte surface that softens visible layer lines. These properties make Bambu ABS-GF filament suitable for both functional mechanical parts and visually appealing decorative prints.
Parameter Comparison
| Property | ABS | ABS-GF | Improvement |
| Stiffness (Bending Modulus – XY) | 1880 MPa | 2860 MPa | +52.1% |
| Strength (Bending Strength – XY) | 64 MPa | 68 MPa | +6.3% |
| Layer Strength (Bending Strength – Z) | 39 MPa | 46 MPa | +17.9% |
| Heat Resistance (HDT, 0.45 MPa) | 87 °C | 99 °C | +13.8% |
Enhanced Strength and Stiffness
Bambu ABS-GF filament delivers greater strength and stiffness compared with regular ABS filament. The glass fiber reinforcement improves structural rigidity, allowing printed parts to better withstand loads and resist bending. This makes the material well suited for engineering prototypes, load-bearing components, and mechanical assemblies where reliable structural performance is required.
Greater Dimensional Stability
Thanks to glass fiber reinforcement, Bambu ABS-GF filament provides improved dimensional stability during 3D printing. The material helps minimize shrinkage, warping, and deformation, especially when printing complex or precise geometries. This stability makes ABS-GF particularly suitable for mechanical parts, assembly components, and structural prints that require consistent accuracy.
Fine Matte Surface Finish
The addition of glass fiber gives Bambu ABS-GF filament a distinctive matte surface finish with subtle micro-texture. This effect helps blur layer lines and creates a smoother visual appearance compared with standard ABS prints. The refined surface quality makes ABS-GF filament ideal for decorative objects, consumer products, and parts where aesthetics matter alongside performance.
Water Resistance & Long-Lasting Durability
Bambu ABS-GF filament inherits the durability and water resistance of ABS while benefiting from additional reinforcement. The material performs well in demanding environments and can be used to produce long-lasting components such as housings, connectors, fixtures, and functional household items. Its durability makes it suitable for both prototypes and end-use parts.
RFID Enabled Smart Printing
Bambu ABS-GF filament integrates RFID technology that stores printing parameters directly in the spool. When used with the Bambu Lab AMS (Automatic Material System), the printer automatically reads the RFID information and applies optimized settings for the material. This intelligent system simplifies the workflow by eliminating manual configuration, allowing users to load the filament and start printing immediately.
Wholesale & Private Label Services
We offer wholesale and private label (OEM) services for a wide range of 3D printing accessories, including build plates, hotends, and related components.
More Options
Product videos
Printing Tips
• Drying conditions: 80℃ for 8 hrs. Dry the filament before printing to achieve higher print quality.
• To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing. Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.
• Similar to ABS, pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area and use enclosed printers.
Specification
Accessory Compatibility
| Category | Recommended | Not Recommended |
| Build Plate | Smooth PEI Plate, Textured PEI Plate | Cool Plate SuperTack |
| Hotend | Hotend with Hardened Steel Nozzle 0.4mm / 0.6mm (Recommended) / 0.8mm | Hotend with Stainless Steel Nozzle (All Sizes) |
| Glue | Bambu Liquid Glue, Glue Stick | / |
Parameter Comparison
| Property | ABS | ABS-GF | PA6-GF |
| Composition | Acrylonitrile – Butadiene – Styrene | Acrylonitrile – Butadiene – Styrene, Glass Fiber | PA6, Glass Fiber |
| AMS Compatibility | Yes | Yes | Yes |
| Dry Out Before Use | Recommended | Recommended | Required |
| Printing Speed | < 300 mm/s | < 180 mm/s | < 130 mm/s |
| Printer Type | Enclosure | Enclosure | Enclosure |
| Toughness (Impact Strength – XY) | 39.3 kJ/m² | 14.5 kJ/m² | 27.2 kJ/m² |
| Strength (Bending Strength – XY) | 62 MPa | 68 MPa | 120 MPa |
| Layer Strength (Bending Strength – Z) | 39 MPa | 46 MPa | 51 MPa |
| Stiffness (Bending Modulus – XY) | 1880 MPa | 2860 MPa | 3670 MPa |
| Layer Adhesion (Impact Strength – Z) | 7.4 kJ/m² | 5.3 kJ/m² | 4.1 kJ/m² |
| Heat Resistance (HDT, 0.45 MPa) | 87 °C | 99 °C | 182 °C |
| Saturated Water Absorption Rate (25 °C, 55% RH) | 0.65% | 0.53% | 2.56% |
Recommended Printing Settings
| Recommended Printing Settings | Parameters |
| Drying Settings (Blast Drying Oven) | 80 °C, 8 h |
| Printing and Storage Humidity | < 20% RH (Sealed Container with Desiccant) |
| Nozzle Temperature | 240 – 270 °C |
| Bed Temperature (with Glue) | 80 – 100 °C |
| Printing Speed | < 180 mm/s |
Physical Properties & Mechanical Properties
| Material Properties | Value |
| Density | 1.08 g/cm³ |
| Vicat Softening Temperature | 103 °C |
| Heat Deflection Temperature | 99 °C |
| Melting Temperature | 202 °C |
| Melt Index | 7.56 ± 1.4 g/10 min |
| Tensile Strength | 36 ± 3 MPa |
| Breaking Elongation Rate | 6.3% ± 1.2% |
| Bending Modulus | 2860 ± 130 MPa |
| Bending Strength | 68 ± 4 MPa |
| Impact Strength | 14.5 ± 1.5 kJ/m² |
Bambu Lab ABS-GF Orange Filament 1kg
Reviews
There are no reviews yet